We Buy Used Pad-Mounted Distribution Switchgear

Data Center Buyers buys used and surplus pad-mounted medium-voltage switchgear from underground data center loops and industrial campuses throughout the US and Canada. We consider air-insulated fused gear, SF6-insulated units, and solid-dielectric assemblies with vacuum fault interrupters. Send nameplates, circuit diagrams, photos, and your shutdown schedule for a written offer within 24 hours, typically one business day. Call 951-403-5738 or request a quote online.

Illustration of green pad-mounted medium-voltage switchgear on a concrete pad outside a data center
Illustration for this page. It shows the general equipment type, not a specific unit we bought.

Selling Pad-Mounted Switchgear: What to Know

Pad-mounted distribution switchgear often remains useful after a data center changes its underground feeder layout, replaces transformer taps, or retires a campus loop. The sale depends on more than the number of outdoor cabinets. Each unit has a particular arrangement of incoming sources, switched ways, and protected outgoing circuits. A way is a circuit position, not necessarily a fault-protected feeder. Preserve the cabinet's circuit diagram and identify which positions contain load-interrupter switches, fuses, or vacuum fault interrupters. A complete assembly with recognizable cable interfaces and matching controls is easier to evaluate than an enclosure stripped of its operating components.

Insulation and interruption are separate characteristics. S&C PMH is live-front air-insulated gear, while PME provides dead-front air-insulated construction. S&C Vista uses SF6 insulating gas; Vista Green is a different gas-insulated variant and should not be identified as SF6 equipment by appearance alone. Eaton ISG-SD and G&W Trident use solid-dielectric insulation with vacuum switching or interruption. These differences affect condition questions, documentation, and handling plans. Send the actual model designation and insulation label rather than describing every sealed tank as gas-filled. For a mission-critical campus, also identify equipment ownership and the date the loop can be released without disrupting circuits that remain in service.

Pad-Mounted Switchgear We Buy

Air-insulated switching and fused taps

Gas-insulated pad-mounted assemblies

Solid-dielectric switching and fault interruption

What Affects Your Offer for pad-mounted switchgear

Way arrangement and protection method

Count switched ways, fused taps, and fault-interrupting ways separately. Include the cabinet diagram and fuse or protection-control identification. A cabinet with two source switches and two fused taps serves a different requirement from four switching-only positions, even if the enclosures look similar.

Electrical ratings and cable interfaces

Provide rated voltage, continuous current, basic insulation level, and the relevant fault-interrupting or short-time ratings from the label. Identify cable connection ratings separately. A 600 A assembly may have 200 A terminations on particular ways; enclosure size does not establish interface compatibility.

Insulation medium and condition history

Identify air, SF6, or solid-dielectric construction and disclose known leaks, low-pressure indications, water exposure, and fault events. For SF6 units, retain existing gas service records. Do not assume a sealed tank is undamaged or that an apparently clean enclosure establishes the condition inside it.

Enclosure and termination completeness

Missing roofs, panels, barriers, fuse holders, or damaged bushings can limit reuse. Describe corrosion around the enclosure base and any damage from removal. List retained elbows and accessories by identification and condition rather than assuming every cable-connected item will remain with the cabinet.

Controls, records, and release timing

Keep source-transfer controls, motor operators, sensing equipment, and drawings associated with their original unit. Records explaining the configuration reduce uncertainty. Confirm ownership, shutdown timing, and access to the pad so the offer and removal plan describe the actual assets available to purchase.

For broader pricing context, read our guide: Used switchgear value on the secondary market.

What to Send for an Accurate Quote

When Companies Sell pad-mounted switchgear

Removal, Safety, and Logistics

Qualified electricians must de-energize and lock out the gear before disconnection. Removal is coordinated with your electrician or facility team, with all disconnection completed before removal work begins. Share remaining live-loop boundaries, access restrictions, documented weights, and lifting information. For SF6 units, agree in writing who handles any needed gas recovery and associated records; do not vent gas or open the tank for transport preparation. When we purchase, de-installation, rigging, and insured freight are included, with no removal or recycling fees deducted from the offer. Pickup is typically scheduled within a few business days after acceptance around access, security, and uptime needs.

Power Equipment Removal Is Planned Before Pickup

This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Data center power equipment strapped to a flatbed during decommissioning
Data center power equipment secured on a flatbed during project removal.

Get a Written Offer for Your Pad-Mounted Switchgear

Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.

Pad-Mounted Switchgear: Seller Questions

Does a four-way pad-mounted cabinet mean four protected feeder circuits?

No. Way count describes circuit positions, which can combine load-interrupter switches, fused circuits, and fault interrupters. A switching-only way does not establish feeder fault protection. Send the unit's circuit diagram and identify the equipment installed at each position. This lets us evaluate the actual configuration instead of treating every four-way enclosure as an equivalent asset.

Is dead-front pad-mounted gear necessarily solid-dielectric?

No. Dead-front describes the connection and access arrangement, not the insulation medium. S&C PME is an example of dead-front air-insulated gear. Eaton ISG-SD is solid-dielectric-in-air equipment using vacuum technology. Send the manufacturer label and construction information so we can distinguish those designs. Do not open an energized cabinet to identify internal insulation or obtain photographs.

Should SF6 be removed from a Vista tank before requesting an offer?

Do not arrange gas removal simply to obtain a quote. Send the tank label, existing pressure information, and available gas service records without disturbing the equipment. Before removal, the parties should identify the responsible gas-handling specialist and any recovery or documentation needed for the agreed disposition. End-of-life SF6 equipment needs gas recovery to avoid emissions; transferring an intact unit is a different handling situation.

What should stay with a motor-operated campus loop switch?

Keep its matched operators, control cabinet, sensing equipment, connection cables, and available drawings together. Mark which components belong to each pad-mounted unit before the project separates them. Explain whether the assembly used remote supervision or source transfer. Retain operational records your facility needs, and coordinate removal of site-specific communication credentials under your security procedures before handoff.

Can base corrosion or missing cable elbows affect a pad-mounted switchgear offer?

Yes. Enclosure damage, bushing condition, and missing connection accessories affect completeness and potential reuse. Photograph visible base corrosion and describe any flood exposure or damage during disconnection. Older or non-working assemblies can still have resale or parts value; what cannot be resold is recycled responsibly. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects.

Related Switchgear We Buy

Pad-Mounted Switchgear Brands We Buy

Get a written offer within 24 hours

Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.

Call 951-403-5738 or request a quote online.