We Buy Outdoor Switchgear, Power Skids & E-Houses
Data Center Buyers buys used and surplus outdoor switchgear, skid-mounted power centers and prefabricated electrical houses throughout the US and Canada. Send the electrical inventory, enclosure photos, drawings and site access details for a written offer within 24 hours after we receive the asset list and photos. When we purchase, de-installation, rigging and insured freight are included. Call 951-403-5738 or use our online quote form.

Selling Outdoor Switchgear & E-Houses: What to Know
An outdoor power assembly has two assets to describe: the electrical equipment and the structure that protects it. A non-walk-in lineup has no enclosed operating aisle; a walk-in design adds a sheltered aisle. An e-house is a prefabricated electrical building that can contain low- and medium-voltage equipment plus environmental controls. For a modular data center or campus expansion, the floor plan, cable entry arrangement and shipping sections can matter as much as the equipment ratings. Before offering the assembly, identify which cabinets, building systems and structural pieces belong to it and which must remain with the operating site.
A NEMA 3R label describes an enclosure's degree of protection against rain, sleet and snow when properly installed; it is not a hosedown or submersion rating. It also does not establish the condition of equipment after years outside. Report roof leaks, standing water, corrosion and any periods when enclosure heaters or building HVAC were unavailable. Keep the electrical nameplates separate from the building label so buyers can evaluate both. A complete outdoor power block released after a campus redesign may have different reuse potential from its separated sections. Documenting the package before dismantling gives us a clearer basis for an offer.
Outdoor Switchgear & E-Houses We Buy
Outdoor low-voltage lineups
- NEMA 3R low-voltage switchgear with its matched outdoor enclosure and installed breakers
- Outdoor Eaton Magnum DS assemblies for low-voltage circuits up to 600 V
- Walk-in aisle configurations with the aisle structure, doors and roof pieces identified
- Non-walk-in lineups with intact exterior covers, access doors and section identification
Outdoor medium-voltage lineups
- Outdoor medium-voltage switchgear assemblies with documented equipment and enclosure ratings
- Eaton VacClad-W outdoor aisleless configurations with associated enclosure components
- Eaton VacClad-W sheltered-aisle configurations with their matched aisle structure
- Campus outdoor lineups offered with installed controls, auxiliary sections and available drawings
Prefabricated electrical houses
- Eaton Integrated Power Assemblies offered as documented prefabricated electrical packages
- ABB eHouse and Power Distribution Center assemblies with identifiable installed equipment
- Single-module electrical houses with their structural base and building systems included
- Multi-module e-houses with shipping splits, connecting hardware and module layout records
Skid-mounted power centers
- Equipment skids carrying matched switchgear sections on an identified structural base
- Modular data center power skids released with their electrical inventory and layout
- Surplus outdoor power centers from campus builds with enclosure and transport records
- Partially complete skids with remaining equipment, missing sections and known damage disclosed
What Affects Your Offer for outdoor switchgear & E-houses
Electrical package and usable configuration
List the voltage, bus current and short-circuit ratings from each assembly nameplate. Show the installed equipment on a one-line diagram. Empty expansion bays and a large building footprint do not establish electrical capacity, and missing matched sections can limit reuse.
Weather exposure and enclosure condition
Roof seams, door closures, ventilation openings and corrosion deserve clear photos. Report water entry and storage conditions rather than relying on the outdoor label. Separate superficial exterior deterioration from known damage to insulation, controls or structural members.
Building systems retained with the package
Identify the HVAC, heaters, lighting and alarm equipment that will accompany the electrical house. Note their condition and any removed units. A stripped building and a complete environmentally controlled package need different evaluations, even when their switchgear nameplates match.
Dimensions, weight and shipping splits
Provide manufacturer drawings showing module dimensions, documented weights and intended transport divisions. Explain added roof equipment or structural alterations. An assembly that can leave the site in documented sections presents fewer unknowns than one with no transport information or obstructed access.
Drawings and matched structural components
Retain floor plans, equipment layouts and module connection details. Identify the base, aisle panels, stairs, roof closures and loose hardware included in the sale. Missing pieces or undocumented field changes make it harder to evaluate the assembly as a complete package.
For broader pricing context, read our guide: Used switchgear value on the secondary market.
What to Send for an Accurate Quote
- An asset list separating the outdoor enclosure or e-house from its installed electrical equipment, with manufacturers, serial numbers, quantities and ownership boundaries.
- Readable electrical nameplate photos showing voltage, bus current and short-circuit ratings, plus the enclosure or building identification label and any marked enclosure type.
- Exterior photos of all accessible sides, roof condition, doors and structural base; include interior and aisle photos only where your facility team confirms safe access.
- Available one-line diagrams, floor plans, general arrangement drawings, module dimensions, documented shipping weights and manufacturer shipping-split or lifting information.
- An inventory of included HVAC, heaters, lighting, alarms, stairs, platforms and loose connecting hardware, with known failures, leaks, corrosion or missing components identified.
- Site city, shutdown window, removal deadline, crane access and staging space; describe fences, overhead obstructions, adjacent live equipment and restrictions on truck movement.
When Companies Sell outdoor switchgear & E-houses
- A modular data center expansion changes direction, leaving an unused electrical house and its installed power equipment surplus to the revised campus plan.
- A campus power upgrade replaces outdoor lineups after the new power train is commissioned, releasing the old gear and matched weather enclosures together.
- A colocation facility consolidates buildings and removes an e-house, with the seller confirming which equipment and site accessories are included.
- An industrial plant retires a skid-mounted power center and wants an offer before separating the switchgear from its base and enclosure.
Removal, Safety, and Logistics
Outdoor assemblies require planning for both electrical isolation and heavy transport. The gear must be de-energized and locked out by qualified electricians before disconnection; removal is coordinated with your electrician or facility team. Do not open energized compartments for quote photos. Share manufacturer lifting information, shipping divisions, site obstructions and the shutdown sequence before dismantling. When we purchase, de-installation, rigging and insured freight nationwide are included, with no removal or recycling fees deducted from the offer. Pickup is typically scheduled within a few business days after acceptance, around access, security and uptime needs. Keep module labels and connecting pieces associated with their original sections.
Power Equipment Removal Is Planned Before Pickup
This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Get a Written Offer for Your Outdoor Switchgear & E-Houses
Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.
Outdoor Switchgear & E-Houses: Seller Questions
Should I offer an e-house as a complete building or list only its switchgear?
Describe both in the initial submission. Include a building-level inventory and separate entries for the electrical assemblies inside it. Identify HVAC, stairs, platforms and structural pieces that will accompany the purchase. Do not dismantle the package just to simplify the asset list. Drawings and condition records help us evaluate whether the whole e-house or its identifiable equipment offers the more practical reuse opportunity.
Does a NEMA 3R label establish that my outdoor lineup has no water damage?
No. The rating describes a degree of enclosure protection, not the current condition of a used lineup. NEMA 3R covers rain, sleet and snow but does not provide a hosedown or submersion rating. Disclose flooding, roof leaks and water marks, and send existing inspection records. Never open energized compartments to investigate moisture for a quote; arrange any necessary access with your facility's qualified electricians.
Which walk-in aisle pieces should stay with an outdoor switchgear sale?
Keep the aisle roof, side and end panels, entry doors and available connecting hardware identified with the lineup. Include drawings that show how the sheltered aisle relates to the electrical sections. If stairs, platforms or heaters are included, list them too. Missing enclosure pieces can change whether the package can be evaluated as a complete outdoor assembly, so disclose anything already removed.
What if my e-house is too large to leave the site in one load?
Send the original transport drawings, module dimensions and documented weights along with photos of the access route. Identify any building extensions or equipment added after installation. Manufacturer shipping divisions can inform the removal plan, but do not assume arbitrary cuts will preserve the structure or equipment. We coordinate purchased-equipment removal around the site's access constraints; discuss those constraints before crews separate modules or discard connecting pieces.
Can I get an offer for an installed outdoor power skid before its shutdown?
Yes. Submit accessible nameplate photos, the equipment list, layout drawings and your earliest safe shutdown window while the skid remains installed. Identify nearby equipment that must keep operating. We provide a written offer within 24 hours after receiving the asset list and photos. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects. Older or non-working equipment can still have resale or parts value; what cannot be resold is recycled responsibly.
Related Switchgear We Buy
- Pad-Mounted Switchgear
- Low-Voltage Switchgear
- Medium-Voltage Switchgear
- Unit Substations
- New Surplus Switchgear
- All Electrical Switchgear
Outdoor Switchgear & E-Houses Brands We Buy
Get a written offer within 24 hours
Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.
Call 951-403-5738 or request a quote online.