We Buy Used Utility Service-Entrance Switchgear
Data Center Buyers buys used and surplus service-entrance switchgear throughout the US and Canada, including customer-owned utility metering sections, medium-voltage main breaker lineups, low-voltage service switchboards, and main-tie-main assemblies. Send an asset list, nameplate photos, and available utility drawings through our online quote form or call 951-403-5738. We provide a written offer within 24 hours, typically one business day, after receiving the asset list and photos.

Selling Service-Entrance Switchgear: What to Know
Service-entrance equipment sits at the boundary between the utility supply and a facility's electrical distribution. For a data center capacity upgrade or campus closure, the sale starts with identifying that boundary: which cabinets belong to the facility, which metering devices belong to the utility, and which incoming circuits must remain in operation. A complete service lineup can be easier to evaluate than separated cabinets because its drawings explain the incoming connections and main disconnect arrangement. Preserve the utility metering compartment, main section, and connecting hardware as an identified assembly until the purchase and removal scope are agreed.
Utility-specific construction can affect the pool of potential buyers even when two lineups have matching voltage and amperage. EUSERC, the Electric Utility Service Equipment Requirements Committee, develops service-equipment and metering requirements used by utilities across the western US. Documented EUSERC arrangements and other utility-specific metering sections help establish what was built, but acceptance at the original site does not establish acceptance at another location. Send the original utility name, approved drawings if available, and records of later changes. For Canadian assets, identify the province and serving utility rather than assuming a US metering arrangement applies.
Service-Entrance Switchgear We Buy
Low-voltage incoming service switchboards
- Service-labeled breaker-main or fused-main boards with matching incoming cable termination sections.
- 480Y/277 V and 208Y/120 V service assemblies, with installed ratings documented on their labels.
- 600Y/347 V service boards from Canadian facilities, with original utility and equipment documentation.
- Eaton Pow-R-Line CS and Siemens SB3 service configurations with their associated metering provisions.
Utility metering compartments and service sections
- Customer-owned current-transformer metering compartments offered with the matching incoming service equipment.
- EUSERC-configured sections with identifiable drawings, intact barriers, covers, and utility sealing provisions.
- Non-EUSERC utility arrangements with the original utility requirements and cabinet dimensions identified.
- Eaton Pow-R-Line Xpert commercial metering switchboards configured for incoming service, with included sections listed.
Medium-voltage utility main breaker lineups
- Customer-owned incoming main breaker sections with assembly and breaker nameplates available for review.
- Utility-interface metering sections with current and voltage transformer details documented where available.
- Main service assemblies retaining their protection controls, control-power equipment, and original wiring drawings.
Matched main-tie-main service assemblies
- Paired service mains and the connecting tie section, identified together on the facility one-line diagram.
- Main-tie-main lineups retaining their interlocks, control wiring documentation, and section identification labels.
- Complete incoming service packages from retired power rooms, with utility-owned devices excluded from the asset list.
What Affects Your Offer for service-entrance switchgear
Documented utility metering arrangement
Name the serving utility and provide its original service drawings. Metering compartment dimensions, cable entry, and sealing provisions can restrict reuse. EUSERC documentation helps describe the arrangement; it is not a substitute for the receiving utility's review.
Service ratings and installed main devices
Assembly voltage, bus amperage, and fault ratings must come from nameplates or drawings, not cabinet size. Identify each installed main breaker or switch separately, including protection features. A main device's rating alone does not establish the entire lineup's rating.
Completeness across the incoming sections
Missing metering barriers, service neutral hardware, or bus connections can limit a complete assembly's reuse. Record what remains with each section and what the utility will remove. Keep original section numbers and shipping-split hardware associated with the lineup.
Main-tie-main controls and configuration records
A main-tie-main arrangement connects two circuits through a tie breaker at their load buses. Buyers need the actual one-line and interlock documentation, not an assumption about redundant utility feeds. Describe missing controls and modifications that differ from the original drawings.
Condition and traceable service history
Report the last operating date, known main-device faults, moisture exposure, and visible damage. Existing maintenance and inspection records help explain condition. Older or non-working service gear may retain resale or parts value, but incomplete identification makes that harder to assess.
For broader pricing context, read our guide: Used switchgear value on the secondary market.
What to Send for an Accurate Quote
- An asset list naming the manufacturer, family, serial numbers, section count, site city, and who owns each service cabinet and metering device.
- Clear exterior and nameplate photos showing assembly voltage, bus current, fault ratings, service-use markings, and the installed main breaker or switch identification.
- The current one-line diagram identifying the utility interface, incoming mains, metering locations, tie connections, and equipment that must remain operational after the sale.
- Original utility service drawings, EUSERC references if applicable, and records of metering-compartment or incoming-connection modifications made after installation.
- Available drawings or existing safe photos of metering barriers, instrument transformer labels, service neutral hardware, and interlocks; do not open energized or utility-sealed compartments for a quote.
- A list of included connecting bus, covers, control equipment, and shipping-split hardware, plus any devices the utility plans to retain or remove.
- Known faults, maintenance records, approximate lineup dimensions and weights from drawings, utility shutdown timing, loading access, security restrictions, and the required removal deadline.
When Companies Sell service-entrance switchgear
- A colocation facility increases its incoming service capacity and releases the old metering and main sections after the replacement utility connection is ready.
- A campus consolidates its electrical services, leaving a customer-owned medium-voltage utility main lineup surplus once the remaining buildings have an established supply.
- A data center redesign replaces a main-tie-main service assembly, creating a sale opportunity for the matched mains, tie section, and documented controls.
- An industrial property closes or changes use, leaving incoming service switchboards available after ownership boundaries and the utility's retained metering devices are identified.
Removal, Safety, and Logistics
Service-entrance removal must account for the utility connection and any neighboring circuits that remain live. Qualified electricians must de-energize and lock out the gear before disconnection; utility work and access to sealed compartments must be coordinated with the serving utility. Removal is coordinated with your electrician or facility team. When we purchase, de-installation, rigging, and insured freight are included, with no removal or recycling fees deducted from the offer. Pickup is typically scheduled within a few business days after acceptance, around access, security, and uptime needs. Retain section labels, drawings, and matching hardware through handoff.
Power Equipment Removal Is Planned Before Pickup
This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Get a Written Offer for Your Service-Entrance Switchgear
Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.
Service-Entrance Switchgear: Seller Questions
Can the utility's revenue meter be included with my service-entrance lineup?
Include only equipment you own and have authority to sell. A customer-owned metering cabinet and a utility-owned revenue meter can occupy the same service assembly. Ask the utility to identify retained meters, instrument transformers, or other devices before agreeing to the asset scope. List exclusions explicitly so the offer describes the equipment that can actually be handed over.
Does an EUSERC metering section remain acceptable after relocation to another utility?
Do not assume it does. EUSERC publishes common requirements, while individual utilities publish their own acceptability information. Keep the original drawings and utility correspondence with the section so its construction can be evaluated. A new installation needs review against the receiving utility's requirements. Documentation can make the equipment easier to match, but it does not establish universal acceptance.
Can I offer one service main while retaining the other half of a main-tie-main lineup?
Yes, identify the proposed sale boundary on the one-line diagram and explain which sections remain in operation. Include the tie section and controls only if they are part of the offered assets. A partial lineup may have a different reuse opportunity from the intact assembly. Your facility's electrical team must determine the retained system's isolation and operating arrangement before anything is disconnected.
What does a UL 891 label establish about my low-voltage service switchboard?
UL 891 identifies the switchboard construction standard; the label alone is not proof that every switchboard has the required service-equipment configuration. Photograph any service-use marking as well as each section's identification. Eaton's service-equipment guidance describes additional neutral and bonding provisions. We need the actual labels and drawings to distinguish your incoming service assembly from a downstream distribution board.
Can I request an offer before the utility disconnects my retired service entrance?
You can submit the asset list, existing photos, and drawings while the service remains connected. State the planned utility outage and earliest safe removal window; do not disturb sealed compartments or disconnect equipment to obtain a quote. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects. Call 951-403-5738 or use our online quote form to share the service-removal scope.
Related Switchgear We Buy
- Electrical Switchboards
- Medium-Voltage Switchgear
- Low-Voltage Switchgear
- Unit Substations
- All Electrical Switchgear
Service-Entrance Switchgear Brands We Buy
Get a written offer within 24 hours
Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.
Call 951-403-5738 or request a quote online.