We Buy Used Metal-Clad Switchgear Lineups
Data Center Buyers buys used and surplus metal-clad switchgear from data centers and industrial facilities throughout the US and Canada. We evaluate complete lineups and identifiable sections with their matching draw-out vacuum breakers. Send the asset list, nameplate photos, and removal timeline for a written offer within 24 hours. Call 951-403-5738 or request a quote online.

Selling Metal-Clad Switchgear: What to Know
Metal-clad switchgear is more than a row of medium-voltage cabinets. IEEE C37.20.2 construction separates the breaker, main bus, instrumentation, and cable connections with grounded metal barriers. Draw-out breakers and automatic shutters are important identifying features of the vacuum-breaker families covered here. When selling a lineup, preserve the relationship between each breaker and its cell rather than counting every cabinet as the same asset. Data center campus feeder changes can release complete assemblies that still have resale potential, while an incomplete lineup may be evaluated for compatible sections or parts. The offer depends on what is actually included, not just the manufacturer's name.
We consider metal-clad equipment in 5, 15, 27, and 38 kV classes, with the exact nameplate rating recorded for each assembly. A campus upgrade may make an entire lineup surplus, but a phased project may release only selected feeder sections. In either case, identify the equipment that must remain in service and the boundary of the proposed sale. Drawings that show section order, bus arrangement, and breaker assignments make a partial sale easier to evaluate. Keep shutters, barriers, auxiliary drawers, and connection hardware associated with their original sections. Separating those items before the offer can make it harder to establish how complete the equipment is.
Metal-Clad Switchgear We Buy
Identified metal-clad manufacturer lineups
- Eaton VacClad-W assemblies with matching draw-out vacuum breakers, including their original cell and breaker identification.
- Siemens GM-SG metal-clad assemblies with drawout vacuum breakers and documented section arrangements.
- Square D Masterclad assemblies with draw-out vacuum breakers, intact compartment barriers, and available lineup drawings.
Complete assemblies and defined sections
- Complete incoming, tie, and feeder lineups released from a data center campus power distribution upgrade.
- Identifiable breaker sections offered with their assigned breakers, compartment doors, shutters, and bus connection material.
- Unused expansion sections from a changed campus build, with original drawings identifying their intended lineup position.
- Industrial distribution lineups in 5, 15, 27, or 38 kV classes, described by their actual equipment nameplates.
Compartment equipment kept with the lineup
- Matching voltage-transformer and control-power-transformer drawers, identified by the sections they came from.
- Installed protective relays, meters, and control wiring documented as part of the metal-clad assembly.
- Original inter-section bus joints, covers, end barriers, and hardware retained with the purchased sections.
- Lineup-specific breaker handling accessories and racking tools included in the seller's equipment list.
What Affects Your Offer for metal-clad switchgear
Breaker-to-cell identification
Record breaker model, serial number, and original cell assignment. The same voltage or manufacturer does not establish interchangeability. Missing breakers or unclear matching information can limit the usefulness of otherwise intact sections and change how the offer is evaluated.
Electrical ratings shown on the labels
Send the assembly voltage, main bus continuous-current rating, and breaker interrupting rating separately. Main bus ratings such as 1200, 2000, 3000, and 4000 A appear in metal-clad designs, but available combinations depend on the family and configuration. Use the actual nameplates.
Shutters, barriers, and compartment completeness
Disclose missing shutters, grounded barriers, doors, insulating covers, or auxiliary drawers. These are part of the assembly's construction, not incidental sheet metal. A complete identifiable cell presents a different resale opportunity from a cabinet stripped of its operating and protective components.
Drawings and original section arrangement
One-line diagrams, general arrangement drawings, and wiring diagrams help describe main, tie, and feeder relationships. Mark which sections are included and which remain onsite. Unidentified alterations or missing bus joints make a separated lineup harder to evaluate as a reusable assembly.
Condition and storage history
Provide available maintenance records, the last operating date, and known faults. Report water intrusion, corrosion, heat damage, or missing insulation without disturbing the equipment. Older or non-working metal-clad gear can retain resale or parts value, but condition needs to be described honestly.
For broader pricing context, read our guide: Used switchgear value on the secondary market.
What to Send for an Accurate Quote
- A section-by-section asset list showing manufacturer, family, serial numbers, cell labels, and the number of matching breakers included.
- Readable assembly and breaker nameplate photos showing voltage, continuous current, interrupting ratings, and control voltage where marked.
- Exterior photos of the complete lineup and each offered section, with section order and any missing doors or covers identified.
- Existing compartment photos showing shutters, barriers, auxiliary drawers, and installed devices; do not open energized equipment for quote photos.
- Available one-line, arrangement, and wiring drawings, maintenance records, and a list of modifications or known damage.
- An accessory and hardware list covering bus joints, end barriers, racking tools, and breaker handling equipment that will accompany the sale.
- Site city, ownership confirmation, shutdown window, removal deadline, section dimensions, available weight information, and the route to the loading area.
When Companies Sell metal-clad switchgear
- A data center campus replaces an older metal-clad feeder lineup after the new distribution path is commissioned, releasing the original cells and breakers together.
- A phased colocation expansion changes the section arrangement, leaving unused metal-clad breaker cells and their matching equipment surplus to the revised design.
- An industrial facility consolidates electrical distribution and offers a documented metal-clad lineup with its auxiliary drawers, drawings, and handling accessories.
- A campus closes one power room while adjacent equipment remains active, requiring a clearly defined sale boundary and a coordinated shutdown before removal.
Removal, Safety, and Logistics
Metal-clad sections and draw-out breakers require a removal plan based on equipment weight, shipping splits, and site access. Qualified electricians must de-energize and lock out the gear before disconnection. Removal is coordinated with the seller's electrician or facility team, and disconnection must be complete before removal work begins. Do not operate shutters or rack breakers just to gather quote information. When we purchase, de-installation, rigging, and insured freight nationwide are included, with no removal or recycling fees deducted from the offer. Keep section labels, drawings, and matched hardware together. Pickup is typically scheduled within a few business days after acceptance, around access, security, and uptime needs.
Power Equipment Removal Is Planned Before Pickup
This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Get a Written Offer for Your Metal-Clad Switchgear
Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.
Metal-Clad Switchgear: Seller Questions
Which features identify my lineup as metal-clad for an offer?
Look first at the assembly nameplate and available manufacturer drawings for the construction standard and family. IEEE C37.20.2 metal-clad gear uses compartmentalization with grounded metal barriers and drawout breakers; the vacuum-breaker families here also have automatic shutters. Send existing photos and documents if identification is uncertain. A metal enclosure alone does not establish metal-clad construction, and you should not open energized compartments to confirm internal features.
Can I offer metal-clad cells after some matching breakers were retained?
Yes, submit the remaining sections with an accurate list of included and retained breakers. Identify empty cells by section label and original breaker assignment, using drawings or records already available. Missing breakers can change whether the equipment is evaluated as a complete assembly or for section and parts value. Do not assume a breaker with the same voltage rating will fit the empty cell.
Should automatic shutters and grounded barriers stay with sold metal-clad sections?
Yes. Keep the original shutters, grounded barriers, doors, and compartment covers associated with their sections. Their condition and completeness help describe the assembly being offered. List any missing or damaged pieces and send existing documentation rather than removing parts for closer photos. A stripped enclosure is not equivalent to a complete metal-clad cell, even when its breaker is still available.
What records help identify modified metal-clad breaker cells?
Include original drawings plus records of breaker replacements, cell conversions, control changes, and revised wiring. Photograph existing labels that identify the modification, and distinguish original equipment from later additions in the asset list. A family name alone may not describe the current cell configuration. If records are incomplete, state that clearly rather than representing an altered lineup as unchanged factory equipment.
Can a metal-clad lineup be quoted before its campus shutdown?
Yes. Send the asset list, accessible nameplate photos, drawings, and earliest safe shutdown date while the lineup is still installed. Define the sections included in the sale and any neighboring gear that must remain operational. We provide a written offer within 24 hours after receiving the asset list and photos. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects.
Related Switchgear We Buy
- Medium-Voltage Switchgear
- Metal-Enclosed Switchgear
- Arc-Resistant Switchgear
- Vacuum Circuit Breakers
- Switchgear Parts & Components
- All Electrical Switchgear
Metal-Clad Switchgear Brands We Buy
Get a written offer within 24 hours
Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.
Call 951-403-5738 or request a quote online.