We Buy Used and Surplus Arc-Resistant Switchgear
Data Center Buyers buys used and surplus arc-resistant low-voltage and medium-voltage switchgear throughout the US and Canada. Send the lineup inventory, arc-rating labels, photos, and details of the matching plenum or exhaust duct. We provide a written offer within 24 hours, typically one business day, after receiving the asset list and photos. Call 951-403-5738 or request a quote online before dismantling the exhaust assembly.

Selling Arc-Resistant Switchgear: What to Know
Arc-resistant switchgear is evaluated for the effects of internal arcing faults under IEEE C37.20.7. Its designation describes the tested assembly and operating conditions, not simply a heavier cabinet or an arc-flash warning sticker. Type 2 addresses accessible front, rear, and side surfaces; Type 2B extends that protection with designated instrument or control compartment doors open. Neither designation means power-compartment doors can be opened without regard to electrical hazards. For sellers, the important distinction is evidence: preserve the manufacturer's arc-rating label, applicable design-test documentation, installation drawings, reinforced doors, and original pressure-relief components so the offered assembly can be identified accurately.
Data center power-room replacements and campus distribution changes can release arc-resistant lineups that remain useful elsewhere. Their reuse potential depends on more than bus ratings and breaker counts. The original exhaust route may include a top plenum, duct elbows, a discharge outlet, or a design-specific vent arrangement. Separating those pieces from the lineup makes evaluation harder and can limit reuse. Record what belongs to each power train before contractors divide the removal scope. A complete matching exhaust assembly is helpful, but another installation still needs its own application review; an existing Type 2B label does not establish suitability for every future room layout.
Arc-Resistant Switchgear We Buy
Arc-resistant low-voltage lineups
- Eaton arc-resistant Magnum PXR and Magnum DS switchgear with identifiable arc labels, installed breakers, and matching enclosure components.
- Siemens Type 2B WL arc-resistant low-voltage switchgear, including the matching mounting base and integrated arc plenum.
- Complete arc-resistant main, tie, and feeder assemblies from data center power rooms, with each section identified in the inventory.
- Unused arc-resistant low-voltage assemblies with original drawings and separately packed exhaust components accounted for alongside the cabinets.
Arc-resistant medium-voltage lineups
- Eaton VacClad-W arc-resistant 5 and 15 kV lineups with matching breaker sections, auxiliary sections, and available exhaust assemblies.
- Siemens GM-SG-AR medium-voltage switchgear with Type 2B identification and drawings showing the original lineup and exhaust arrangement.
- Manufacturer-identified Type 2 or Type 2B campus feeder lineups, offered with their arc-rating labels and configuration records.
Matching arc-exhaust assemblies with the gear
- Original top plenums and section-specific plenum pieces, labeled to show their position over the offered switchgear lineup.
- Matching arc ducts, elbows, outlet assemblies, and connecting hardware retained from the original installation rather than mixed with unrelated ventilation.
- Original vent stacks or chimneys and integrated base components shown in the manufacturer's drawings for the offered assembly.
- Factory enclosure parts, reinforced doors, latches, and pressure-relief components kept with their corresponding sections during planned removal.
Documented partial and surplus assemblies
- Partial arc-resistant lineups with a clear section map, a missing-parts list, and an explanation of where the remaining exhaust pieces are located.
- Cancelled-project assemblies with unpacked cabinets and boxed plenum components matched by shipping records or factory assembly drawings.
- Older or non-working arc-resistant equipment with disclosed damage and enough identification to evaluate possible resale or parts value.
What Affects Your Offer for arc-resistant switchgear
Arc designation and supporting records
Photograph the accessibility type, rated arc current, and arc duration on the arc-rating label. Keep applicable manufacturer design-test records separate from routine service reports. A warning sticker alone does not establish that a lineup is arc-resistant.
Complete exhaust path
Identify the plenum, duct sections, elbows, outlets, and any integrated base included in the sale. Missing or altered exhaust pieces can limit reuse. Original installation drawings help distinguish required assembly components from site-built supports and unrelated room ventilation.
Doors, barriers, and relief components
Disclose bent doors, missing fasteners, damaged latches, removed barriers, and obstructed or missing relief devices. Arc-resistant performance depends on the configured enclosure. Cosmetic appearance cannot establish that its pressure-management features remain intact after service or previous modifications.
Electrical configuration and assembly identity
Send voltage, bus current, breaker ratings, section quantities, and control details alongside the arc label. Breaker interrupting capability and the assembly's internal-arc rating describe different performance characteristics. A higher-rated replacement breaker does not by itself raise the lineup's arc rating.
Condition history and removal completeness
Report storage exposure, the last operating date, known faults, and any internal arc event. Keep section identifiers and hardware organized during removal. A documented, complete assembly is easier to evaluate than cabinets whose exhaust parts and condition history cannot be traced.
For broader pricing context, read our guide: Used switchgear value on the secondary market.
What to Send for an Accurate Quote
- Asset list with manufacturer, family, serial numbers, section quantities, electrical ratings, and the location of each lineup within the facility.
- Readable photos of the main equipment nameplate and separate arc-rating labels, including accessibility type, arc current, duration, and operating-condition notices.
- Exterior views showing the full lineup, reinforced doors, installed plenum, and exhaust route; do not open energized compartments for quote photos.
- Inventory and photos of detached duct lengths, elbows, outlets, vent stacks, base components, and hardware, with missing or altered pieces identified.
- One-line diagram, section layout, original exhaust drawings, applicable manufacturer design-test documentation, and available maintenance or incident records for the actual assembly.
- Site city, shutdown window, ceiling and doorway constraints, equipment weights if documented, loading access, ownership boundaries, and the deadline for removing exhaust components.
When Companies Sell arc-resistant switchgear
- A colocation power-room replacement releases a complete arc-resistant lineup after the new power train is commissioned, allowing cabinets and overhead exhaust components to be offered together rather than separated by different contractors.
- A campus feeder redesign leaves medium-voltage arc-resistant sections available, but the owner must identify which plenum pieces belong to the removed lineup and which remain with energized equipment.
- A cancelled data center expansion leaves unused arc-resistant switchgear and separately packaged ductwork, making shipping lists and factory drawings important for confirming the assembly's completeness before a quote.
- An industrial facility consolidation makes an arc-resistant electrical room surplus, with sale planning tied to roof-level exhaust access, landlord ownership of penetrations, and a coordinated shutdown rather than cabinet removal alone.
Removal, Safety, and Logistics
Qualified electricians must de-energize and lock out the gear before disconnection. Removal is coordinated with the seller's electrician or facility team, and disconnection precedes removal work. Keep the section map, exhaust drawings, and labeled plenum hardware with the assembly. Identify overhead access and any duct shared with equipment that will remain. When we purchase, de-installation, rigging, and insured freight nationwide are included, with no removal or recycling fees deducted from the offer. Pickup is typically scheduled within a few business days after acceptance around security and uptime needs. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects.
Power Equipment Removal Is Planned Before Pickup
This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Get a Written Offer for Your Arc-Resistant Switchgear
Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.
Arc-Resistant Switchgear: Seller Questions
Does a Type 2B label allow power-compartment doors to be open during arc-resistant switchgear removal?
No. Type 2B concerns designated instrument or control compartment doors under the manufacturer's tested conditions; it is not permission to open power compartments or disconnect energized equipment. Qualified electricians must de-energize and lock out the gear before disconnection. Submit existing labels, drawings, and exterior photos first. The arc-resistant designation does not replace the site's electrical safety procedures or make removal from an operating power room safe.
Can I offer an arc-resistant lineup if its original plenum or discharge duct is missing?
Yes, submit it for evaluation and identify exactly what is absent. Missing exhaust components can reduce reuse options, but not every design uses the same arrangement: some have no overhead plenum, while others depend on matching ducts or an integrated base. Send the installation drawings and labels rather than guessing that ordinary sheet-metal ductwork is an equivalent replacement. We evaluate completeness without assuming a partial assembly retains its original arc-resistant performance.
Which records distinguish arc-resistant design testing from routine switchgear maintenance reports?
Keep manufacturer documentation identifying the IEEE C37.20.7 evaluation, accessibility type, tested configuration, arc current, and duration with the assembly records. Routine inspection or breaker maintenance reports can explain condition, but they do not independently establish the enclosure's internal-arc performance. If the original design-test documentation is unavailable, say so and send the arc-rating label, serial numbers, drawings, and operating-condition notices. Do not commission new electrical testing simply to request a purchase quote.
Will you consider arc-resistant switchgear that has experienced an internal arc fault?
Submit the asset details with the incident clearly disclosed. Arc-resistant construction is intended to address effects on personnel outside the enclosure under tested conditions; it does not establish that the equipment remains operational after a fault. Describe affected sections, heat damage, displaced doors, and missing relief components using existing records and safely obtained photos. Older or non-working equipment can still have resale or parts value, with responsible recycling of what cannot be resold.
Should roof-level arc ducts stay with the lineup when the building contractor owns their removal scope?
Coordinate ownership and access before accepting a removal sequence. List which ducts, elbows, outlets, supports, and penetration-related pieces are included, then match them to the original exhaust drawing. Do not let identifiable plenum components enter an unrelated demolition stream before the purchase scope is settled. Tell us if landlord-owned pieces must remain or if adjoining equipment uses the same route. The quote can then address the actual assembly being offered, not an assumed complete exhaust path.
Related Switchgear We Buy
- Low-Voltage Switchgear
- Medium-Voltage Switchgear
- Metal-Clad Switchgear
- Switchgear Parts & Components
- Damaged or Non-Working Switchgear
- All Electrical Switchgear
Arc-Resistant Switchgear Brands We Buy
Get a written offer within 24 hours
Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.
Call 951-403-5738 or request a quote online.