We Buy Used and Surplus Automatic Transfer Switches

Data Center Buyers buys used and surplus automatic transfer switches from data centers and other critical facilities throughout the US and Canada. We consider open-transition, closed-transition, bypass-isolation, and service-entrance configurations, including equipment rated from 100 to 4000 A. Send the asset list and photos through our online quote form or call 951-403-5738. We provide a written offer within 24 hours, typically one business day, after receiving those materials.

Illustration of an automatic transfer switch cabinet open to show its switching mechanism and copper bus
Illustration for this page. It shows the general equipment type, not a specific unit we bought.

Selling Automatic Transfer Switches: What to Know

An automatic transfer switch connects a load to a normal or alternate power source under controller supervision. In a data center, that may mean transferring a UPS input or mechanical plant supply between utility and generator power. For a seller, the important distinction is the actual transfer configuration, not just the cabinet's size. Open transition disconnects one source before connecting the other. Closed transition briefly overlaps acceptable sources under the switch's control logic. Identify which arrangement you have from the model information and drawings, and preserve the controller identification. Two cabinets with the same amperage can have different applications and different reuse prospects.

UL 1008 covers transfer switch equipment, and the nameplate's electrical ratings are central to evaluating an ATS for purchase. ASCO 7000 SERIES equipment includes automatic transfer switches rated up to 600 VAC and 4000 A; that does not mean every unit has those ratings or every option. Bypass-isolation assemblies, service-entrance units, and older ASCO 4000 SERIES switches should be identified separately in your asset list. Data Center Buyers purchases single switches through larger facility lots. Include the last operating date, any unresolved transfer faults, and the shutdown schedule so the offer reflects the equipment you own and the removal access available.

Automatic Transfer Switches We Buy

Open- and closed-transition ATS assemblies

Bypass-isolation configurations

Service-entrance automatic transfer switches

Identifiable manufacturer families

What Affects Your Offer for automatic transfer switches

Amperage, voltage, and neutral arrangement

Record continuous current, voltage, phase, frequency, and pole count from the equipment itself. A solid-neutral configuration and a switched-neutral configuration are not interchangeable descriptions. Matching these details to another installation affects reuse potential; a large enclosure alone does not establish a larger electrical rating.

Transition mode and bypass completeness

Open, delayed, and closed transition serve different transfer requirements. A bypass-isolation assembly needs its matching bypass and isolation components identified. Missing draw-out hardware, interlocks, doors, or connection sections can reduce the usefulness of an otherwise recognizable transfer switch. Photograph the complete assembly before parts are separated.

Withstand and close-on rating documentation

The withstand and close-on rating, or WCR, concerns fault-current duty rather than normal load amperage. Send the entire rating table, including voltage, time, and any specified upstream breaker or fuse conditions. A single fault-current number without its associated conditions is not enough to describe the rating.

Controller generation and retained options

Identify the installed controller rather than assuming it from the cabinet family. Include its model, display condition, communication modules, remote annunciators, and available manuals. Disclose a blank display, missing control boards, unresolved alarms, or undocumented modifications because these change how complete the ATS is as an asset.

Operating history and physical condition

Existing maintenance reports and transfer records help explain the last known condition without requiring a new transfer exercise for the quote. Report overheating, water exposure, corrosion, sticking mechanisms, or failed operations. Older or non-working switches may retain resale or parts value, but age alone does not establish condition.

For broader pricing context, read our guide: Used switchgear value on the secondary market.

What to Send for an Accurate Quote

When Companies Sell automatic transfer switches

Removal, Safety, and Logistics

Do not operate a transfer switch or open energized compartments just to obtain quote information. Qualified electricians must de-energize and lock out the gear before disconnection, accounting for normal, alternate, and control power sources. Removal is coordinated with your electrician or facility team, and disconnection happens before any removal work. When we purchase, de-installation, rigging, and insured freight nationwide are included, with no removal or recycling fees deducted from the offer. Keep controllers, bypass sections, keys, drawings, and identified hardware together. Pickup is typically scheduled within a few business days after acceptance, around access, security, and uptime needs.

Power Equipment Removal Is Planned Before Pickup

This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Data center power equipment strapped to a flatbed during decommissioning
Data center power equipment secured on a flatbed during project removal.

Get a Written Offer for Your Automatic Transfer Switches

Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.

Automatic Transfer Switches: Seller Questions

Does a closed-transition ATS have more resale value than an open-transition switch?

Not automatically. Closed transition connects the second source before releasing the first when source conditions permit, while open transition disconnects first. The appropriate configuration depends on the next installation. Send the exact transition designation, controller information, and electrical ratings. Do not describe closed transition as preventing every outage: overlap requires acceptable sources, and a source failure is a different operating condition. Configuration alone does not determine the offer.

Should I keep the bypass-isolation cabinet attached when offering an ATS?

Keep the assembly intact until the sale and removal plan are agreed. Bypass-isolation equipment provides a separate path that allows the automatic transfer portion to be isolated for maintenance while the load is supplied through the bypass. Its value as a complete assembly depends on matching components. Identify draw-out mechanisms, bypass controls, connection sections, and loose accessories in your list; do not separate or operate them for quote photos.

Which details on an automatic transfer switch WCR label should I photograph?

Photograph the whole label at a resolution that makes the table and footnotes readable. UL 1008 permits multiple withstand and close-on ratings with different time or protective-device conditions. Capture the associated voltage, duration, breaker designation, or fuse class wherever shown. Do not substitute the ATS continuous-current rating or the upstream breaker's interrupting rating for the switch's WCR. If the label is missing, send available manufacturer drawings and catalog identification.

Can a service-entrance ATS be identified just by a main breaker in its cabinet?

No. Send the assembly's service-entrance designation, equipment markings, and drawings rather than inferring the rating from a breaker. Service-entrance ATS configurations combine transfer functionality with utility-side disconnect and overcurrent protection. Some ASCO service-entrance assemblies have UL 891 markings while the transfer mechanism is UL 1008 listed, so preserve both sets of identification. List the matching protective and connection sections as part of the offered assembly.

Can I submit an older ASCO 4000 ATS with a missing or failed controller?

Yes, describe the missing controller or failure clearly and send the cabinet and catalog identification. Older or non-working equipment can still have resale or parts value, although missing controls affect completeness and the offer. Include existing fault records and identify components still present without attempting a transfer exercise. What cannot be resold is recycled responsibly. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects.

Related Switchgear We Buy

Automatic Transfer Switches Brands We Buy

Get a written offer within 24 hours

Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.

Call 951-403-5738 or request a quote online.