We Buy 5kV Switchgear from Cooling Plants and Campuses
Data Center Buyers buys used and surplus 5kV-class switchgear from data center cooling plants, legacy campus distribution systems, and industrial facilities throughout the US and Canada. Send the assembly and breaker nameplates, section inventory, photos, and shutdown schedule. We provide a written offer within 24 hours after receiving the asset list and photos, typically one business day. Call 951-403-5738 or request a quote online.

Selling 5kV Switchgear: What to Know
A 5kV-class lineup may have served a 2.4kV motor plant or a 4.16kV distribution bus. Those operating voltages are not the same thing as its maximum equipment voltage: manufacturer tables for Eaton VacClad-W and Siemens GM-SG list 4.76kV maximum-voltage ratings for their 5kV-class breakers. When selling, preserve both the equipment labels and the facility one-line diagram. In a data center, these assets may become available when large chiller feeders are replaced or an older cooling plant closes. Identify the actual loads served rather than describing every medium-voltage cabinet as part of the site's main utility service.
The potential buyer for a removed 5kV lineup may be evaluating a complete distribution assembly or compatibility with a plant retaining its existing electrical system. That distinction affects how the equipment should be described. Matching voltage class alone does not establish that another facility can use the gear; breaker interfaces, bus capacity, fault ratings, and control arrangements also matter. A complete, identifiable assembly gives us more information than disconnected cabinets without drawings. Keep section numbers and feeder labels associated with the equipment, and disclose alterations. We buy single breakers through full power rooms and campuses, but each offer depends on the assets actually included.
5kV Switchgear We Buy
5kV-class breaker lineups
- Eaton VacClad-W assemblies identified as 5kV class, with matching installed breakers and available lineup drawings.
- Siemens GM-SG 5kV-class assemblies with GMSG breaker identification and section-by-section equipment lists.
- Main, tie, and feeder sections from 2.4kV or 4.16kV buses, with ownership and removal boundaries identified.
- Complete 5kV-class lineups with 1,200A, 2,000A, or 3,000A breakers, recording the main bus rating separately.
Cooling and motor-plant distribution
- 4.16kV switchgear feeding large chiller plants, with the outgoing feeder functions shown on the one-line diagram.
- 2.4kV switchgear released by motor-plant replacement, with starter equipment identified separately from the switchgear.
- 5kV-class incoming and distribution sections from retired campus mechanical plants, including their associated metering sections.
- Surplus feeder sections from an abandoned cooling expansion, with original documentation and storage history where available.
Documented partial 5kV assemblies
- Removed 5kV feeder sections with clear records of which breakers and control devices remain installed.
- Lineup-associated spare breakers included in a 5kV equipment lot, each listed by its own nameplate ratings.
- 5kV assemblies retaining voltage transformers, current transformers, and control power equipment, with their labels recorded.
- Older or non-working 5kV gear with identifiable components, disclosed faults, and photos showing missing equipment.
What Affects Your Offer for 5kV switchgear
Operating voltage and equipment voltage class
Record the former system voltage, assembly maximum voltage, and each breaker voltage rating separately. A 4.16kV feeder description does not replace a nameplate. Voltage-transformer ratios and grounding information in the drawings help explain the configuration offered.
Continuous current versus fault interruption
Typical documented breaker currents include 1,200A, 2,000A, and 3,000A. Eaton lists 25, 40, 50, and 63kA symmetrical interrupting ratings for its 5kV-class VCP-W breakers; these are not universal ratings. Photograph the actual labels and keep bus withstand data separate.
Fit with retained 2.4kV or 4.16kV plants
Manufacturer, breaker family, cell arrangement, and control voltage affect compatibility for replacement or retrofit projects. Include records of modifications and breaker substitutions. Similar enclosure dimensions or the same 5kV class do not establish an interchangeable assembly.
Cooling-plant duty and documented condition
State whether the lineup served chiller feeders, other motors, or general distribution. Provide existing maintenance records and the last operating date. Moisture exposure, corrosion, insulation damage, and unresolved trip events can narrow reuse options even when the cabinets appear complete.
Completeness of the offered sections
Identify installed breakers, empty cells, auxiliary equipment, and missing doors or bus connections. Preserve manufacturer drawings and section labels. A partial lineup requires a precise boundary description, especially when the adjacent main bus or cooling feeders will remain in service.
For broader pricing context, read our guide: Used switchgear value on the secondary market.
What to Send for an Accurate Quote
- Clear exterior photos and readable assembly nameplates showing manufacturer, voltage class, bus amperage, and available short-circuit or withstand ratings. Do not open energized compartments for photos.
- Each breaker nameplate, showing family, serial number, rated voltage, continuous current, and interrupting rating; associate every photo with its section and feeder label.
- The facility one-line diagram showing the former 2.4kV or 4.16kV system, main and tie positions, chiller feeders, and the exact equipment offered.
- Section inventory listing installed breakers, empty cells, voltage and current transformers, relays, meters, control power devices, and included operating accessories.
- Available manufacturer drawings, maintenance reports, modification records, last operating date, known faults, and any history of water exposure or unsuitable storage.
- Site city and province or state, ownership details, shutdown window, removal deadline, lineup dimensions, available weight information, and loading-route or security restrictions.
When Companies Sell 5kV switchgear
- A data center replaces its 4.16kV chiller plant and releases the old switchgear after the new cooling system is commissioned and the affected feeders can be isolated.
- A legacy campus retires a 2.4kV distribution area, leaving a documented main-and-feeder lineup that no longer supports occupied buildings or active mechanical equipment.
- A cooling-capacity project changes scope before installation, making its 5kV-class feeder sections surplus while the owner retains drawings and records of how the equipment was stored.
- An industrial site consolidates motor operations, offering an older 5kV lineup together with matched spares and a clear account of missing components or operating faults.
Removal, Safety, and Logistics
Coordinate removal with the seller's electrician or facility team, particularly where neighboring 4.16kV cooling feeders must remain operational. The gear must be de-energized and locked out by qualified electricians before disconnection, and disconnection must happen before removal work. Do not obtain internal photos from energized compartments. Share access limits, section dimensions, weight records, and the approved shutdown window. When we purchase, de-installation, rigging, and insured freight are included, with no removal or recycling fees deducted from the offer. Keep identified breakers, accessories, and drawings associated with their sections throughout pickup.
Power Equipment Removal Is Planned Before Pickup
This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Get a Written Offer for Your 5kV Switchgear
Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.
5kV Switchgear: Seller Questions
Does a 4.76kV nameplate belong in a 5kV switchgear quote?
Yes. Manufacturer data for the 5kV-class Eaton and Siemens breaker families discussed here lists 4.76kV as the rated maximum voltage. The equipment may have operated on a 2.4kV or 4.16kV system. Send the assembly label, breaker labels, and one-line diagram rather than changing the description to an assumed operating voltage. Ratings on every included asset still need to be identified; the class name alone does not establish application suitability.
Should I report the 5kV breaker interrupting rating or the bus withstand rating?
Report both, using the wording and units on each label. Breaker interrupting current describes a different duty from assembly short-time withstand or closing and latching current. Do not combine these into a single kA number. Manufacturer tables show multiple fault ratings within the same 5kV class, so neither voltage nor continuous amperage establishes interrupting capability. Existing drawings can help when an assembly label is incomplete.
Can I offer a 4.16kV chiller-feeder lineup while the cooling plant is still operating?
You can submit installed equipment for consideration before shutdown. Use accessible exterior labels and existing drawings, and explain which cooling loads remain active. Do not open energized compartments or disconnect equipment for quote photos. We coordinate purchased-equipment removal with your electrician or facility team around the shutdown window. Pickup is typically scheduled within a few business days after acceptance, subject to access, security, and uptime needs.
Can an older 2.4kV lineup still matter to a plant retaining that voltage?
Older equipment can still have resale or parts value, particularly when another facility needs compatible components for a retained system. That possibility is not a promise of demand for every lineup. Send the manufacturer identification, breaker family, modifications, condition records, and a complete section list. Discontinued status alone does not determine the offer. Describe missing or non-working equipment honestly; what cannot be resold is recycled responsibly.
What should I clarify when offering only selected 5kV feeder sections?
Mark the included sections on the one-line and lineup drawings, and identify any shared bus, controls, or auxiliary equipment that must stay with the facility. Keep the proposed sale boundary separate from the electrician's isolation plan. We evaluate the documented scope before coordinating removal. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects. Avoid separating the sections before the sale and removal scope are agreed.
Related Switchgear We Buy
- Medium-Voltage Switchgear
- Metal-Clad Switchgear
- Vacuum Circuit Breakers
- Obsolete Switchgear & Breakers
- All Electrical Switchgear
5kV Switchgear Brands We Buy
Get a written offer within 24 hours
Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.
Call 951-403-5738 or request a quote online.