We Buy Used Protective Relays and Power Quality Meters
Data Center Buyers buys used and surplus protective relays, power meters, and power quality meters from data center switchgear and spare-parts inventories throughout the US and Canada. Send the full model codes, quantities, condition notes, and photos for a written offer within 24 hours, typically one business day. Call 951-403-5738 or use our online quote form before discarding identifiable devices during a controls upgrade.

Selling Protective Relays & Power Meters: What to Know
A switchgear controls refresh can leave useful protection and metering hardware behind even when the facility keeps its power lineup. Feeder relays, generator protection relays, and power quality meters should be identified individually rather than listed as miscellaneous electronics. In a data center, record which power train or feeder each device came from and whether it was operating at shutdown. A relay's job is different from a meter's: protection devices initiate protective actions, while meters record electrical measurements and, depending on the model, power quality events. A familiar front-panel name alone does not describe the installed options or establish compatibility.
We consider installed devices scheduled for removal, previously removed units, and unused spares from data centers and industrial electrical rooms. Keep each unit associated with its case, terminal connectors, mounting hardware, and any separate display. Exact ordering codes matter because devices bearing the same family name can have different sensing inputs, auxiliary power requirements, communications, or input/output options. Record firmware before an approved configuration reset, but do not send passwords or sensitive operating files with an initial quote request. If you are retiring an entire lineup, identify these devices within the asset list before separating them; the sale and removal plan should make clear which equipment remains on site.
Protective Relays & Power Meters We Buy
Feeder protection relays
- SEL-751 Feeder Protection Relays and SEL-351S Protection Systems, with full identification and installed option details.
- GE Multilin 750 and Multilin 850 feeder protection relays, including removed devices and matching spare units.
- ABB Relion REF615 feeder protection and control relays, with their corresponding cases and plug-in units identified.
Generator protection and spare relay lots
- SEL-700G Generator Protection Relays removed from standby plants, listed separately from generator control equipment.
- Unused protective relay spares from cancelled electrical upgrades, with packaging labels and complete ordering codes.
- Mixed lots of removed protective relays, sorted by manufacturer, exact model, configuration, and known condition.
Power and power quality meters
- Schneider Electric PowerLogic PM8000 meters, identifying integrated-display units versus transducers and remote-display arrangements.
- Schneider Electric PowerLogic ION9000 series meters, with firmware information and available mounting and connection accessories.
- Eaton Power Xpert Meter 4000, 6000, and 8000 devices, with separate displays and installed communications cards noted.
What Affects Your Offer for protective relays & power meters
Complete ordering code and sensing inputs
A family name is only the starting point. Photograph the complete model or ordering code and the input labels. Conventional current and voltage inputs are not interchangeable with low-energy sensor inputs. List the actual configuration rather than assigning the device the voltage rating of its former switchgear.
Auxiliary power, communications, and I/O options
Record auxiliary power requirements and installed communications or input/output modules. Rear-panel photos help distinguish otherwise similar units. Missing cards or an undocumented option combination can limit compatibility with a retained protection or monitoring platform and make the offer harder to establish.
Firmware identification and configuration access
Provide the firmware version from an existing record or an approved information screen when safely available. Disclose unknown passwords or restricted configuration access without sharing credentials. Describe any reset already performed; a firmware revision, hardware option code, and site settings file are different pieces of information.
Operating history and visible damage
Report the last operating date, known alarms, failed displays, damaged terminals, and moisture or heat exposure. Existing maintenance reports can support the condition description. Older or non-working units can still have resale or parts value, but a lit display alone does not establish the condition of every function.
Cases, connectors, displays, and lot consistency
Keep matched cases, detachable terminal connectors, mounting brackets, and separate displays with their devices. Identify a display-only item as such. A sorted lot of matching configurations is easier to evaluate than an unsorted box, particularly when removed plug-in relays have become separated from their original cases.
For broader pricing context, read our guide: Used switchgear value on the secondary market.
What to Send for an Accurate Quote
- An asset list with manufacturer, exact family, complete ordering code, serial number, quantity, and a distinction between installed, removed, and unused units.
- Clear front-panel and identification-label photos; include rear input, auxiliary power, and communications labels only where they are safely accessible.
- Available firmware versions and hardware option records, plus whether configuration access is known, restricted, or affected by a previous reset; do not include passwords.
- Photos and counts of matched relay cases, separate meter displays, terminal connectors, mounting hardware, and installed option cards without disturbing connected equipment.
- Last operating date, known faults, storage conditions, and available maintenance documentation; state whether settings or event records will be retained or removed by your team.
- Site city, ownership confirmation, planned shutdown date, loading access, security requirements, and whether the devices are included in a larger switchgear purchase.
When Companies Sell protective relays & power meters
- A colocation operator replaces feeder protection across its A and B power trains, releasing identifiable relays after the replacement protection is in service.
- A campus metering upgrade replaces older power quality meters, leaving removed devices with their displays and communications accessories available as a documented lot.
- A cancelled data center expansion leaves unused protective relay spares whose ordering codes no longer match the revised electrical design.
- An industrial facility or retired data center power room releases generator protection relays and panel meters after the associated circuits are permanently taken out of service.
Removal, Safety, and Logistics
Qualified electricians must de-energize and lock out the equipment before disconnection. Removal is coordinated with your electrician or facility team; do not pull connected relays or disturb sensing circuits to obtain quote photos. Preserve the device-to-case identification and label separate displays before packing. Your team should retain required operating records and complete approved configuration or credential removal before handoff. When we purchase, de-installation, rigging, and insured freight nationwide are included, with no removal or recycling fees deducted from the offer. Pickup is typically scheduled within a few business days after acceptance, around access, security, and uptime needs.
Power Equipment Removal Is Planned Before Pickup
This owner-provided project photo shows data center power equipment secured on a flatbed during a removal. Switchgear sections, breakers, and transfer equipment are heavy, so dimensions, weights, access routes, and rigging needs are confirmed with your team before the truck arrives.

Get a Written Offer for Your Protective Relays & Power Meters
Send nameplate photos, quantities, and your removal timeline. We reply with a written offer within 24 hours of receiving the list and photos.
Protective Relays & Power Meters: Seller Questions
Should I send the settings files from my SEL or Multilin relays with a quote request?
No sensitive settings files are needed for an initial request. Start with labels, ordering codes, firmware versions, photos, and a condition summary. Preserve the records your operations team needs, then let your electrical and security teams decide what can be shared or reset after safe isolation. Old settings describe the former installation; they are not approval for reuse elsewhere. Tell us if no settings files will accompany the hardware.
Can a PowerLogic or Power Xpert meter be offered after a configuration reset?
Yes. Document the exact model, options, firmware, and known condition before your team follows the manufacturer's procedure appropriate to that device. Do not assume a reset clears every stored record or restores unknown credentials. State which actions were completed and whether access remains restricted. Retain any operating records required by your facility before clearing information, and do not change a meter still serving an active monitoring system.
Do missing REF615 cases or separate meter displays affect the offer?
They can. ABB REF615 cases and plug-in units need corresponding identification, and some meter arrangements use a separate display rather than an integrated screen. Photograph and list each piece so we can distinguish a complete assembly from a relay module, transducer, or display alone. Partial devices can still be submitted for consideration, but disclose missing connectors, cases, displays, or mounting parts instead of describing them as complete.
Is the switchgear's primary voltage enough to identify a removed feeder relay?
No. The relay's input configuration and auxiliary power labels matter independently of the switchgear's primary voltage. Send the full ordering code and available input specifications, including whether conventional instrument-transformer inputs or low-energy sensor inputs are fitted. Your existing drawings can help identify the former application, but do not open energized compartments or disconnect wiring to locate those details. Unknown information can be marked as unknown in the asset list.
Can I offer one spare SEL-700G or a mixed relay-and-meter lot without the lineup?
Yes. Data Center Buyers considers individual units and mixed lots throughout the US and Canada. Sort the list by exact configuration and distinguish unused spares from removed or non-working devices. We provide a written offer within 24 hours, typically one business day, after receiving the asset list and photos. Payment is by company check or wire transfer, on pickup or per agreed terms for larger projects. What cannot be resold is recycled responsibly.
Related Switchgear We Buy
- Medium-Voltage Switchgear
- Switchgear Parts & Components
- Generator Paralleling Switchgear
- New Surplus Switchgear
- All Electrical Switchgear
Protective Relays & Power Meters Brands We Buy
Get a written offer within 24 hours
Send your asset list and we respond with a firm written offer, typically within one business day. We pay top dollar, handle rigging and freight, and provide secure data wiping with a certificate on request.
Call 951-403-5738 or request a quote online.